NanoVNA-F VNA SWR Meter VHF UHF Antenne Analyzer 4.3 IPS LCD Metal Case Vector Network Analyzer 50KHz-1000MHz NanoVNA-F firmware release 0.0.5, measuring frequency to 1.5GHz! 1.support measurable frequency to 1.5 GHz, default setting 1 GHz, accurate measurement up to 1.35GHz. 2.fix: unexpected 0.3dB offset of s21 in thru 3.fix: mark all off bug 4.fix: clutter display when standing wave ratio is infinite 5.add version & info command 6.add REAL IMAG R X trace format For more information, visit: http: //deepelec.com/2019/12/30/nanovna-f-0_0_5/ Features: Use 4.3-inch IPS TFT LCD and resistive touching screen, with a larger view angle and can be seen clearly in strong outdoor light. Switch to a large capacity 5000mAh/3.7V lithium battery, longer standby time, and expand a USB interface. Usually, it can be used as a power bank when the instrument is not used. The Lipo charing IC to be changed to IP5306 (with 2A high charing current), making the charging time shorter. Use a larger and better operating level. Use a larger and better operating power switch. Support Chinese and English menu switching. Upgrade the user program by virtual U disk (16MB SPI flash memory inside). Standard aluminium housing to protect SMAhead and reduce the interference of external electromagnetic waves to instrument. The NanoVNA-F measurement ranges is 50k-1.5GHz. Use the harmonic of the clock chip SI5351 to measure frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic ranges of 40dB (the standing waves ratio is less than 1.02). The RF front end is designed with a metal shield that allows the S21 to have a dynamic ranges better than 60dB over the full frequency ranges. Specifications: Main material: PCB Color: black Type: with battery Battery: 1 * lithium battery, 3.7V, 5000mAh Measurement frequency: 50KHz~1500MHz RF output: -13dBm (Max.-9dBm) Frequency accuracy: <0.5PPM Port SWR: ＜1.1 Display: 4.3 inch IPS TFT (800*480) USB interface: USB Type-C Communication mode: CDC (serial) Power consumption: USB 5V 200mA, can use battery powered, maximum charging current 2A Output capacity: 5V/1A Number of calibration points: 101 Number of scanning points: 101 Display tracking: 4, Marking: 4, Setting save: 5 Scanning time: about 1.9s/time (50KHz~1000MHz full frequency band) Can measure S parameters, voltage standing waves ratio SWR, phase map, group delay, Smith chart and so on. Item size: 140 * 75 * 20mm / 5.5 * 3.0 * 0.8in Package size: 145 * 85 * 30mm / 5.7 * 3.3 * 1.2in Package weight: 413g / 0.9lb Package list: 1 * NanoVNA-F VNA SWR Meter VHF UHF Antenne Analyzer 2 * 200mm SMA-JJ RG316 Cable 1 * Set of Calibration Parts 1 * SMA-JJ Double Needle 1 * SMA Elbow (external screw inner hole to inner screw inner needle) 1 * Type-C Data Cable
