ICOM IC-M510E Class-D DSC VHF Marine Radio with WLAN Function

ICOM IC-M510E Class-D DSC VHF Marine Radio with WLAN Function   Use the RS-M500 app (for iOS™/Android™) to remotely control Smart device the IC-M510E through WLAN. Up to three smart devices can be used as a wireless microphone or remote controller in substitute for a simple microphone. Intercom function between your smart device and the radio is also available. Integrated AIS Receiver* With its integrated AIS receiver* or external NMEA sentence (third party AIS receiver, transponder), the IC-M510E can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. * AIS receiver is not included depending on the transceiver version. Wide Viewing Angle Colour TFT LCD   Menu screen The colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions. New Sleek Design   The IC-M510E is slim (depth: 53.6 mm) and easy to install in your boat. It’s all-new sleek design is suitable for either panel or trunnion mounting. Simplified Navigation Function The Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints. Provides Clear, Loud Audio The IC-M510E’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio. Interface BOX for NMEA 2000™ and Hailer The optional CT-M500 wireless interface box provides NMEA 2000™ connectivity and Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point. Prestigious iF Design Award 2022 Recipient The IC-M510 is a winning product of the iF DESIGN AWARD 2022, the world-renowned design prize.  The IC-M510 VHF marine radio provides essential maritime communication and supports safety on the water. Integration with the newly developed RS-M500 smart-device app also enables an unprecedented onboard communication experience. AIS Target Call with MA-510TR When connected to the optional MA-510TRClass B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number. Other Features Effortlessly switch Day and Night display modes with the DISP key Active Noise Canceling NMEA 0183/HS connectivity, NMEA 2000™ (CT-M500 required) Integrated GNSS receiver (Selectable from either internal receiver or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Automatic Foghorn function (CT-M500 required) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied speaker-microphone, HM-205RB can be connected to the rear panel External speaker connection Controlled with COMMANDMIC™ HM-195 or HM-229 series Supports 4-digit channels Rear Panel View IC-M510E Configuration Variations AIS Receiver IC-M510E AIS (#25) Integrated IC-M510E (#15) Not included General IC-M510E Frequency range TX 156.025–161.425 MHz*3 RX 156.300–161.925 MHz*3 DSC 156.525 MHz AIS1, 2*1 161.975, 162.025 MHz Usable channels INT, USA, ATIS*2 channels Type of emission 16K0G3E (FM), 16K0G2B (DSC) 16K0G2B (AIS)*1 Power supply requirement 13.8 V DC (10.8–15.6 V DC) Current drain TX 25 W output 5.0 A RX Max. audio 4.0 A (with HM-195) Operating temperature range –20°C to 60°C; –4°F to 140°F Antenna impedance 50 Ω Weight (approx.) 750 g; 1.7 lb (Not including microphone) Transmitter IC-M510E Output power (at 13.8 V DC) 25 W, 1W Max. frequency deviation ±5 kHz Frequency error ±0.5 kHz Spurious emissions Less than 0.25 μW (at 25 W) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver IC-M510E Sensitivity (at 20 dB SINAD) DSC (1% BER) –5 dBμ –1 dBμ emf Adjacent channel selectivity DSC (1% BER) More than 75 dB More than 73 dBμ emf Spurious response DSC (1% BER) More than 75 dB More than 73 dBμ emf Intermodulation DSC (1% BER) More than 75 dB More than 68 dBμ emf Hum and noise More than 40 dB Audio output power (at 10% distortion) 15 W typ. with a 4 Ω external speaker Wireless LAN IC-M510E Wireless LAN standard IEEE802.11 b/g/n Authentication and Encryption WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels 1 to 13 (2.4 GHz band)*4 Output power Less than 10 mW/MHz *1 Only for the Integrated AIS version. *2 Available depending on the transceiver version. *3 May differ depending on version. *4 May differ depending on the country of use. Measurements made in accordance with EN301 025-2, -3. All stated specifications are subject to change without notice or obligation. Applicable U.S. Military Specifications Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards. Standard MIL-810 G Method Procedure Low Pressure 500.5 I, II High Temperature 501.5 I, II Low Temperature 502.5 I, II Temperature Shock 503.5 I-C Solar Radiation 505.5 I Rain 506.5 I Humidity 507.5 II Salt Fog 509.5 – Dust Blowing 510.5 I Immersion 512.5 I Vibration 514.6 I Shock 516.6 I, IV Also meets equivalent MIL-STD-810-C, -D, -E and -F.